The following tutorials from the ADINA Primer are available for download. Please download and read the Introduction before beginning to work on a tutorial. If you do not have a copy of ADINA yet, you can request your free copy here.

Introduction

Problem 1: Deflection of a beam

Problem 2: Plate with a hole in tension

Problem 3: Plate with a hole in tension using ADINA-M

Problem 4: Cylinder subjected to tip load

Problem 5: Round bar with circumferential groove subjected to tip loading

Problem 6: Square wall-driven cavity

Problem 7: Contact between a block and a rigid cylinder

Problem 8: Analysis of a shell corner

Problem 9: Thermal stress analysis of a cylinder

Problem 10: Beam subjected to impact load

Problem 11: Beam subjected to impact load — mode superposition

Problem 12: Beam subjected to earthquake load

Problem 13: Visualizing the mesh quality

Problem 14: Pushover analysis of a frame

Problem 15: Acoustic analysis of a monopole

Problem 16: Analysis of a shaft-shaft intersection using ADINA-M

Problem 17: Analysis of a cracked body using ADINA-M

Problem 18: Fluid flow over a flexible structure in a channel

Problem 19: Fluid flow and mass transfer within a pipe

Problem 20: Natural convection and specular radiation within an enclosure

Problem 21: Conjugate heat transfer and natural convection within an enclosure

Problem 22: Rubber O-ring pressed between two frictionless plates

Problem 23: Limit load analysis of a pipe bend

Problem 24: Deformation of a pipe due to internal fluid flow

Problem 25: Heat transfer from solidifying concrete blocks

Problem 26: Analysis of a cable-stayed bridge

Problem 27: Beam subjected to harmonic and random loads

Problem 28: Unsteady fluid flow over a flexible structure in a channel

Problem 29: Analysis of a shell-shell intersection with ADINA-M

Problem 30: Analysis of fluid-structure interaction within a pipe constriction

Problem 31: Analysis of a laminar step-wall diffuser

Problem 32: Analysis of a broken dam using the VOF method

Problem 33: U-bending of a metal sheet — static-implicit & dynamic-explicit analysis

Problem 34: Thermo-mechanical-coupling analysis of a disc braking system

Problem 35: Viscoelastic foam O-ring pressed between two frictionless plates

Problem 36: Analysis of a rising air bubble using the VOF method

Problem 37: FSI analysis of a simplified turbine using a sliding mesh

Problem 38: Analysis of a steam-air heat exchanger

Problem 39: Thermal FSI analysis of a heated hemispherical dome

Problem 40: Analysis of a cracked body with ADINA-M — gluemesh

Problem 41: Analysis of a screwdriver with ADINA-M

Problem 42: 3D turbulent flow in a strongly curved channel

Problem 43: Contact between a block and a rigid cylinder, TLA-S method

Problem 44: Analysis of a bracket assembly with a bolt

Problem 45: Large displacement bending of a plate by an applied moment

Problem 46: Thermal stress analysis of a cylinder – ADINA TMC model

Problem 47: Numerical experiments with rubber material models

Problem 48: Flow between cylinders using adaptive CFD

Problem 49: Analysis of a parachute using adaptive CFD

Problem 50: Post-buckling response of a slender beam

Problem 51: Thermal FSI analysis of a pipe

Problem 52: Crushing of a crash tube

Problem 53: Static 3D EM-fields in a conducting block

Problem 54: Microwave heating by harmonic EM fields in a cavity

Problem 55: Bar buckling due to axial Lorentz force

Problem 56: Electromagnetic driven flow over a cantilever in a channel

Some of the above tutorials are available in video format in the ADINA Video Tutorials page.